Saturday, January 9, 2010

Brownie Starflash What Is The Developing Times For Efke 127 Film?

What is the developing times for Efke 127 film? - brownie starflash

Recently, I received a Brownie Star Flash, and I am with Efke 127 b / w film ISO 100, and I wonder what the development time?
I know that after the developer, 4 to 10 minutes, but what about the fixer, stop bath, hypo-clear photo little flow?

Thank you!

3 comments:

Martin S said...

Find the recommended development times here:

http://www.retrophotographic.com/technic ...

Efke films in general should be handled with care. Some sources say that instead of stopping water intermediate binder also recommends strong acid must be avoided. Fixation time may depend on the product you're using

Here is a description I could give you a good starting point:
http://treerex.blogspot.com/2009_05_01_a ...
You have to travel a little, or go to:
http://treerex.blogspot.com/2009/05/efke ...

Hope it helps

Martin S said...

Find the recommended development times here:

http://www.retrophotographic.com/technic ...

Efke films in general should be handled with care. Some sources say that instead of stopping water intermediate binder also recommends strong acid must be avoided. Fixation time may depend on the product you're using

Here is a description I could give you a good starting point:
http://treerex.blogspot.com/2009_05_01_a ...
You have to travel a little, or go to:
http://treerex.blogspot.com/2009/05/efke ...

Hope it helps

fhotoace said...

I think this is the first time, he developed a movie or do you know that washing with water (not really stop bathroom ... that is used in press) is one minutes, stirring continuously by fixation with one minute, stirring continuously stirring, and the rest of the time after the repair of a normal operating cycle of agitation every 30 seconds. How long? Place a piece of film to develop in the film and binder is the time it must be clear, with no hurry. Then double the time to set the film during the process.

NO hiccups clear "(Hypo Eliminator) is required with film. In the washing machine turbo movie for 30 minutes, the movie plunges into a container of Photo-Flo found a two drops of distilled water and 16 grams at a time until the film is coated with a thin layer of liquid. Then hang to dry in a dust free environment overnight

Post a Comment